last revised in may 2001 1/5 arcotronics italia spa tel. +39051 939111 fax +39051 939479 e--mail: arcoven@arcotronics.com r66 mkt series metallized polyester film capacitor miniature type typical applications : this series combines small size, good performances in by-passing, blocking, pulse coupling and interference suppression in low voltage applications (i.e.: automotive). product code: r66 p=7.5mm construction: stacked and wound technology bmax 2.5 3.5 ? d ? 0.05 0.5to0.6 0.6 all dimensions are in mm product code system the part number, comprising 14 digits, is formed as follows: 12 3 4 5 6789 10 11 12 13 14 r6 6 -- digit 1 to 3 series code. digit 4 d.c. rated voltage: d= 2 63v e = 100v i = 250v m = 400v p = 630v digit 5 pitch: d = 7.5mm digit 6 to 9 digits 7 - 8 - 9 indicate the first three digits of capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the rated capacitance in pf. digit 10 to 11 mechanical version and/or packaging (table 1) digit 12 identifies the dimensions and electrical characteristics. digit 13 internal use digit 14 capacitance tolerance: j=5%; k=10%; m=20% table 1 standard packaging style lead length taping style ordering code (mm) figure no. ( digit 10 to 11) ammo-pack 1 dq ammo-pack 2 28 reel ? 355mm 1 ck loose, short leads loose, long leads 4 +2 17 +1/-2 aa z3 general technical data dielectric: polyester film (polyethylene terephthalate). plates: aluminium layer deposited by evaporation under vacuum. winding: non-inductive type. leads: tinned wire. protection : plastic case, epoxy resin f illed. box material is solvent resistant and flame retardant according to ul94 v0. marking: manufacturer?s logo, capacitance, tolerance, d.c. rated voltage. climatic category: 55/100/56 iec 60068-1 operating temperature range: -55to+105 _ c for stacked technology an upper operating temperature of +125c is allowed for a max operating time of 1000h. related documents: iec 60384-2; cecc 30400 detail specifications: cecc 30401-009 winding scheme single sided metallized polyester film note: ammo-pack is the preferred packaging for taped version. loose taped fig.2 fig.1
last revised in may 2001 2/5 arcotronics italia spa tel. +39051 939111 fax +39051 939479 e--mail: arcoven@arcotronics.com r66 mkt series metallized polyester film capacitor miniature type p=7.5mm product code: r66 stacked version rated c a p 63vdc/40vac max dv/dt max k 0 part number c ap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 0.33 m f 2.5 7.0 10.0 7.5 120 15 e3 r66dd 3330 -- 6 -- 0.47 m f 3.0 8.0 10.0 7.5 120 15 e3 r66dd 3470 -- 6 -- 0.68 m f 3.5 8.5 10.5 7.5 120 15 e3 r66dd 3680 -- 6 -- 1.0 m f 4.0 9.0 10.5 7.5 120 15 e3 r66dd 4100 -- 6 -- 1.5 m f 5.0 11.0 10.5 7.5 120 15 e3 r66dd 4150 -- 6 -- 2.2 m f 6.0 12.0 10.5 7.5 120 15 e3 r66dd 4220 -- 6 -- 3.3 m f 6.0 12.0 10.5 7.5 120 15 e3 r66dd 4330 -- 6 -- rated c a p 100vdc/63vac max dv/dt max k 0 part number cap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 0.068 m f 2.5 7.0 10.0 7.5 150 30 e3 r66ed 2680 -- 6 -- 0.10 m f 2.5 7.0 10.0 7.5 150 30 e3 r66ed 3100 -- 6 -- 0.15 m f 2.5 7.0 10.0 7.5 150 30 e3 r66ed 3150 -- 6 -- 0.22 m f 2.5 7.0 10.0 7.5 150 30 e3 r66ed 3220 -- 6 -- 0.33 m f 3.5 8.5 10.5 7.5 150 30 e3 r66ed 3330 -- 6 -- 0.47 m f 3.5 8.5 10.5 7.5 150 30 e3 r66ed 3470 -- 6 -- 0.68 m f 4.0 9.0 10.5 7.5 150 30 e3 r66ed 3680 -- 6 -- 1.0 m f 5.0 11.0 10.5 7.5 150 30 e3 r66ed 4100 -- 6 -- 1.5 m f 6.0 12.0 10.5 7.5 150 30 e3 r66ed 4150 -- 6 -- rated c a p 250vdc/160vac max dv/dt max k 0 part number cap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 0.022 m f 2.5 7.0 10.0 7.5 200 100 e3 r66id 2220 -- 6 -- 0.033 m f 2.5 7.0 10.0 7.5 200 100 e3 r66id 2330 -- 6 -- 0.047 m f 2.5 7.0 10.0 7.5 200 100 e3 r66id 2470 -- 6 -- 0.068 m f 3.0 8.0 10.0 7.5 200 100 e3 r66id 2680 -- 6 -- 0.10 m f 3.5 8.5 10.5 7.5 200 100 e3 r66id 3100 -- 6 -- 0.15 m f 4.0 9.0 10.5 7.5 200 100 e3 r66id 3150 -- 6 -- 0.22 m f 5.0 11.0 10.5 7.5 200 100 e3 r66id 3220 -- 6 -- 0.33 m f 6.0 12.0 10.5 7.5 200 100 e3 r66id 3330 -- 6 -- tolerance: j ( ? 5%); k ( ? 10%); m ( ? 20%) mechanical version and packaging (table 1) internal use rated c a p 400vdc/200vac max dv/dt max k 0 part number c ap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 6800pf 2.5 7.0 10.0 7.5 275 220 e3 r66md1680 -- 6 -- 0.010 m f 2.5 7.0 10.0 7.5 275 220 e3 r66md2100 -- 6 -- 0.015 m f 2.5 7.0 10.0 7.5 275 220 e3 r66md2150 -- 6 -- 0.022 m f 3.0 8.0 10.0 7.5 275 220 e3 r66md2220 -- 6 -- 0.033 m f 3.5 8.5 10.5 7.5 275 220 e3 r66md2330 -- 6 -- 0.047 m f 4.0 9.0 10.5 7.5 275 220 e3 r66md2470 -- 6 -- 0.068 m f 5.0 11.0 10.5 7.5 275 220 e3 r66md2680 -- 6 -- 0.10 m f 6.0 12.0 10.5 7.5 275 220 e3 r66md3100 -- 6 -- 0.15 m f 6.0 12.0 10.5 7.5 275 220 e3 r66md3150 -- 6 -- tolerance: j ( ? 5%); k ( ? 10%); m ( ? 20%) mechanical version and packaging (table 1) internal use rated c a p 630vdc/220vac* max dv/dt max k 0 part number c ap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 1000pf 2.5 7.0 10.0 7.5 300 378 e3 r66pd 1100 -- 6 -- 1500pf 2.5 7.0 10.0 7.5 300 378 e3 r66pd 1150 -- 6 -- 2200pf 2.5 7.0 10.0 7.5 300 378 e3 r66pd 1220 -- 6 -- 3300pf 2.5 7.0 10.0 7.5 300 378 e3 r66pd 1330 -- 6 -- 4700pf 2.5 7.0 10.0 7.5 300 378 e3 r66pd 1470 -- 6 -- 6800pf 3.0 8.0 10.0 7.5 300 378 e3 r66pd 1680 -- 6 -- 0.010 m f 3.5 8.5 10.5 7.5 300 378 e3 r66pd 2100 -- 6 -- 0.015 m f 4.0 9.0 10.5 7.5 300 378 e3 r66pd 2150 -- 6 -- 0.022 m f 5.0 11.0 10.5 7.5 300 378 e3 r66pd 2220 -- 6 -- 0.033 m f 6.0 12.0 10.5 7.5 300 378 e3 r66pd 2330 -- 6 -- 0.047 m f 6.0 12.0 10.5 7.5 300 378 e3 r66pd 2470 -- 6 -- tolerance: k ( ? 10%); m ( ? 20%) mechanical version and packaging (table 1) internal use in progress c 6800pf @ 630vdc all dimensions are in mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. * not suitable for across-the-line applications. please refer to interference suppression capacitors. in progress
3/5 arcotronics italia spa tel. +39051 939111 fax +39051 939479 e-mail: arcoven@arcotronics.com last revised in may 2001 r66 mkt series metallized polyester film capacitor miniature type p=7.5mm product code: r66 wound version rated c a p 63vdc/40vac max dv/dt max k 0 part number c ap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 0.10 m f 2.5 7.0 10.0 7.5 5 0.63 e3 r66dd 3100 -- 0 -- 0.15 m f 2.5 7.0 10.0 7.5 5 0.63 e3 r66dd 3150 -- 0 -- 0.22 m f 3.5 8.5 10.5 7.5 5 0.63 e3 r66dd 3220 -- 0 -- 0.33 m f 3.5 8.5 10.5 7.5 5 0.63 e3 r66dd 3330 -- 0 -- 0.47 m f 4.0 9.0 10.5 7.5 5 0.63 e3 r66dd 3470 -- 0 -- 0.68 m f 5.0 11.0 10.5 7.5 5 0.63 e3 r66dd 3680 -- 0 -- 1.0 m f 6.0 12.0 10.5 7.5 5 0.63 e3 r66dd 4100 -- 0 -- rated c a p 100vdc/63vac max dv/dt max k 0 part number cap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 0.047 m f 2.5 7.0 10.0 7.5 6 1.2 e3 r66ed 2470 -- 0 -- 0.068 m f 2.5 7.0 10.0 7.5 6 1.2 e3 r66ed 2680 -- 0 -- 0.10 m f 3.5 8.5 10.5 7.5 6 1.2 e3 r66ed 3100 -- 0 -- 0.15 m f 3.5 8.5 10.5 7.5 6 1.2 e3 r66ed 3150 -- 0 -- 0.22 m f 3.5 8.5 10.5 7.5 6 1.2 e3 r66ed 3220 -- 0 -- 0.33 m f 5.0 11.0 10.5 7.5 6 1.2 e3 r66ed 3330 -- 0 -- 0.47 m f 6.0 12.0 10.5 7.5 6 1.2 e3 r66ed 3470 -- 0 -- rated c a p 250vdc/160vac max dv/dt max k 0 part number cap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 0.015 m f 2.5 7.0 10.0 7.5 15 7.5 e3 r66id 2150 -- 0 -- 0.022 m f 2.5 7.0 10.0 7.5 15 7.5 e3 r66id 2220 -- 0 -- 0.033 m f 2.5 7.0 10.0 7.5 15 7.5 e3 r66id 2330 -- 0 -- 0.047 m f 3.5 8.5 10.5 7.5 15 7.5 e3 r66id 2470 -- 0 -- 0.068 m f 3.5 8.5 10.5 7.5 15 7.5 e3 r66id 2680 -- 0 -- 0.10 m f 4.0 9.0 10.5 7.5 15 7.5 e3 r66id 3100 -- 0 -- 0.15 m f 5.0 11.0 10.5 7.5 15 7.5 e3 r66id 3150 -- 0 -- 0.22 m f 6.0 12.0 10.5 7.5 15 7.5 e3 r66id 3220 -- 0 -- tolerance: j ( ? 5%); k ( ? 10%); m ( ? 20%) mechanical version and packaging (table 1) internal use rated c a p 400vdc/200vac max dv/dt max k 0 part number c ap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 3300pf 2.5 7.0 10.0 7.5 30 24 e3 r66md1330 -- 0 -- 4700pf 2.5 7.0 10.0 7.5 30 24 e3 r66md1470 -- 0 -- 6800pf 2.5 7.0 10.0 7.5 30 24 e3 r66md1680 -- 0 -- 0.010 m f 2.5 7.0 10.0 7.5 30 24 e3 r66md2100 -- 0 -- 0.015 m f 3.5 8.5 10.5 7.5 30 24 e3 r66md2150 -- 0 -- 0.022 m f 3.5 8.5 10.5 7.5 30 24 e3 r66md2220 -- 0 -- 0.033 m f 4.0 9.0 10.5 7.5 30 24 e3 r66md2330 -- 0 -- 0.047 m f 5.0 11.0 10.5 7.5 30 24 e3 r66md2470 -- 0 -- 0.068 m f 5.0 11.0 10.5 7.5 30 24 e3 r66md2680 -- 0 -- 0.10 m f 6.0 12.0 10.5 7.5 30 24 e3 r66md3100 -- 0 -- rated c a p 630vdc/220vac* max dv/dt max k 0 part number c ap. b h l p (v/ m s) (v 2 / m s) p a r t n u m b e r 1000pf 2.5 7.0 10.0 7.5 40 50 e3 r66pd 1100 -- 0 -- 1500pf 2.5 7.0 10.0 7.5 40 50 e3 r66pd 1150 -- 0 -- 2200pf 2.5 7.0 10.0 7.5 40 50 e3 r66pd 1220 -- 0 -- 3300pf 3.5 8.5 10.5 7.5 40 50 e3 r66pd 1330 -- 0 -- 4700pf 3.5 8.5 10.5 7.5 40 50 e3 r66pd 1470 -- 0 -- 6800pf 3.5 8.5 10.5 7.5 40 50 e3 r66pd 1680 -- 0 -- 0.010 m f 4.0 9.0 10.5 7.5 40 50 e3 r66pd 2100 -- 0 -- 0.015 m f 5.0 11.0 10.5 7.5 40 50 e3 r66pd 2150 -- 0 -- 0.022 m f 6.0 12.0 10.5 7.5 40 50 e3 r66pd 2220 -- 0 -- tolerance: j ( ? 5%); k ( ? 10%); m ( ? 20%) mechanical version and packaging (table 1) internal use all dimensions are in mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. * not suitable for across-the-line applications. please refer to interference suppression capacitors.
4/5 arcotronics italia spa tel. +39051 939111 fax +39051 939479 e-mail: arcoven@arcotronics.com last revised in may 2001 r66 mkt series metallized polyester film capacitor miniature type p=7.5mm product code: r66 electrical characteristics rated voltage (v r ): 0 63 vdc - 100 vdc - 250 vdc 400 vdc - 630 vdc rated temperature (t r ): +85 _ c temperature derated voltage: for temperatures between +85 _ c and the upper operating temperature ( +105 _ c for wound technology and +125c for stacked technology) a decreasing factor of 1.25% per degree _ c on the rated voltage v r has to be applied. capacitance range: 1000pf to 3.3 m f capacitance values: e6 series (iec 60063 norm). capacitance tolerances (measured at 1 khz) : ? 5% (j); ? 10% (k); ? 20% (m). total self-inductance (l) : 8nh (lead length ~2mm) dissipation factor (df): tg 10 -4. at +25 _ c ? 5 _ c khz tg 10 -4 1 10 100 150 insulation resistance: test conditions temperature: +25 _ c ? 5 _ c voltage charge time: 1 min voltage charge: 50 vdc for v r < 100 vdc 100 vdc for v r 100 vdc performance for v r 100 vdc 3750 m ? for c 0.33 m f (5000 m ? )* 1250 s for c > 0.33 m f (5000 s)* for v r > 100 vdc 30000m ? (50000 m ? )* *typical value test voltage between terminals: 1.6 v r applied for 2 s at +25 _ c ? 5 _ c test method and performance damp heat, steady state: test conditions temperature: +40 _ c ? 2 _ c relative humidity (rh): 93% ? 2% test duration: 56 days performance capacitance change | ? c/c|: 5% df change ( ? tg ) : 50 10 -4 at 1khz insulation resistance: 50% of initial limit. endurance: test conditions temperature: +100 _ c ? 2 _ c test duration: 2000 h voltage applied: 1.25 v c performance capacitance change | ? c/c|: 5% df change ( ? tg ): 50 10 -4 at 10khz insulation resistance: 50% of initial limit. resistance to soldering heat: test conditions solder bath temperature: +260 _ c ? 5 _ c dipping time (with heat screen):10 s ? 1s performance capacitance change | ? c/c|: 2% df change ( ? tg ): 50 10 -4 at 10khz insulation resistance: initial limit. long term stab ility (after two years) : storage standard environmental conditions (see page 10). performance capacitance change | ? c/c|: 3% for c 0.1 m f 2% for c > 0.1 m f reliability reference mil hdb 217 application conditions: temperature: +40 _ c ? 2 _ c voltage: 0.5 v r failure rate: 2fit (1 fit = 1 10 -9 failures/components h) failure criteria: (according to din 44122) short or open circuit capacitance change | ? c/c|: >10% df change ( ? tg ) :>2 initial limit. insulation resistance: <0.005 initial limit.
5/5 arcotronics italia spa tel. +39051 939111 fax +39051 939479 e-mail: arcoven@arcotronics.com last revised in may 2001 r66 mkt series metallized polyester film capacitor miniature type max. voltage (vr.m.s.) versus frequency (sinusoidal wave-form / t h 40 c) 63 vdc / 40 vac 1 10 100 0.1 1 10 100 f [khz] vrms [v] 0.1f - p = 7.5 0.22f - p = 7.5 0.47f - p = 7.5 1f - p = 7.5 250 vdc / 160 vac 10 100 1000 0.1 1 10 100 f [khz] vrms [v] 0.015f - p = 7.5 0.047f - p = 7.5 0.1f - p = 7.5 0.22f - p = 7.5 630 vdc / 220 vac 10 100 1000 0.1 1 10 100 f [khz] vrms [v] 0.001f - p = 7.5 0.0047f - p = 7.5 0.01f - p = 7.5 0.022f - p = 7.5 100 vdc / 63 vac 1 10 100 0.1 1 10 100 f [khz] vrms [v] 0.047f - p = 7.5 0.1f - p = 7.5 0.22f - p = 7.5 0.47f - p = 7.5 400 vdc / 200 vac 10 100 1000 0.1 1 10 100 f [khz] vrms [v] 0.0047f - p = 7.5 0.022f - p = 7.5 0.047f - p = 7.5 0.1f - p = 7.5 note: p (pitch) in mm.
|
